Cincinnati
Electrical
Tool Inc.
ACCESSORIES
OPTIONAL
EQUIPMENT
SHAFT LOCK TWIST DRILL EYE SHIELDS LIGHT ARM

WHEEL DRESSER PEDESTAL STARTING EQUIPMENT

Shaft Lock SHAFT LOCK - Type 000-141

The Cincinnati shaft lock is available as an extra with most 2 HP and larger grinders and buffers.  It quickly and securely locks the spindle shaft to make wheel changing easier.

 Top of Page
TWIST DRILL GRINDING ATTACHMENT - Type 000-145

Quickly grinds straight or taper shank drills, 1/4" to 1-1/4".  The attachment has a micrometer feed.  For Cincinnati grinders only - advise type and serial number when ordering.

 Twist Drill Grinding Attachment Top of Page
EYE SHIELDS - PLAIN AND ILLUMINATEDTop of Page
Plain Eye Shields PLAIN EYE SHIELDS

Where extra illumination under the eye shield is not considered necessary, these eye shields with shatter-proof lenses offer a significant saving.  Furnished mounted or unmounted. Sold in pairs.

Type 000-102:  4-1/2" x 5-1/4" window, for 6" to 12" wheels.
Type 000-103:  5-1/2" x 7-1/2" window, for 12" to 20" wheels.
Illuminated Eye Shields ILLUMINATED EYE SHIELDS

Substantial and practical eye shields, shatter-proof lenses with a bulb in each shield.  Furnished mounted or unmounted; wired or not wired; complete with 110V transformer where required. Sold in pairs. (Style and design may vary from that shown.)
Type 000-111 Not connected to switch. 3-3/4" x 5-3/4" window
for 6", 7" & 8" Grinders
Type 000-121 Mounted and connected to switch; for 115 volts, 60 Hertz, single phase only.
Type 000-131 Mounted and connected to switch; for 230 volts, 60 Hertz, single phase or 230/460 volts, 60 Hertz, 3 phase; includes transformer.
Type 000-113 Not connected to switch. 7" x 9" window
for 12", 14", 18" & 20" Grinders
Type 000-133 Mounted and connected to switch; for 230 volts, 60 Hertz, single phase or 230/460 volts, 60 Hertz, 3 phase; includes transformer.
EYE SHIELDS CAN BE ADAPTED TO OTHER MAKES OF GRINDERS.
FLEXIBLE LIGHT ARM

Furnished singly for small grinders or in pairs for larger units.

Type 000-134 (not connected to switch)
Type 000-135 (mounted and connected to switch - 115/60/1 only)
Type 000-136 (mounted and connected to switch, includes transformer for 230 volts, 60 Hertz, single phase or 230/460 volts, 60 Hertz, 3 phase)

 Flexible Light Arm Top of Page
WHEEL DRESSER

Type 000-148 (not shown)
Hand held for use with straight (Type 1) grinding wheels.

 Top of Page
PEDESTAL

Available in standard 1 & 2 HP sizes.  Specials quoted upon request.

Type 000-156 Pedestal (1 HP) with tool tray and water pot.
Type 000-157 Pedestal (2 HP) with tool tray and water pot.

Type 000-154 Tool tray and water pot only.
Type 000-155 Water pot only.

 Pedestal with Tool Tray and Water Pot Top of Page
SPECIAL ELECTRICAL EQUIPMENTTop of Page
Push Button Safety Starter The push button safety starter or manual starter is a simple mechanical device which provides overload protection and mechanical low voltage protection for the motor.
Push Button Magnetic Starter The magnetic starter is a relay operated switch. The push buttons can be mounted in the starter cover or remotely. It provides overload and undervoltage protection.
JIC and Other Standards Special electrical equipment to meet any specifications or requirements can be furnished as an optional extra.

 
 

PREVIOUS PAGEINDEXEMAILRETURN TO HOME PAGENEXT PAGE