Cincinnati
TYPE 402 Direct Drive
TYPE 413 Belt Drive
TYPE 502 Direct Drive Combination
DISC GRINDER
COMBINATION

 
Choose one of these Cincinnati grinders to suit your disc grinding requirements. Motors are totally enclosed, non-ventilated types, rated for continuous grinder service. All are equipped with ball bearings, grease lubricated and sealed, designed for long life.  Starting equipment is indicated in the table below. The Type 502 has the conventional grinding wheel equipped with the Cincinnati Saf-T-Square wheel guard. The disc grinding wheels are guarded with substantial plate steel guards, adjustable for wheel wear.
Type 402 Double End Direct Drive Disc Grinder Type 502 Combination Disc Grinder
Type 402
Shown with optional lever feed tables.
Wheels not furnished.
Configuration of various models may vary slightly.		 Type 502
Shown with optional JIC starter, plain table.
Wheels not furnished.
Type 413 Double End Belt Drive Disc Grinder Special Double End Wet Disc Grinder
Type 413
10 and 20 HP belt drive disc grinders.
Optional JIC electrics shown.		 Special Type 413-710
Wet disc grinding machine with belt drive and lever feed tables.
Type 413 Special Combination Disc Grinder Combination Disc Grinder with Dust Collector
Type 413-415-8
Combination grinder/disc grinder. Spindle speed of 900 RPM to accommodate 24" x 3" x 2-1/4" straight wheel and 24" disc wheel. Shown with Type 502-391 lever feed table without counterweight.		 Combination Grinder/ Disc Grinder
Offering both a standard wheel and a disc grinder with a massive work table, and equipped with a built-in, motorized dust collector.

CONDENSED SPECIFICATIONS - TYPE 402
DISC GRINDER - DIRECT DRIVE
Order by TYPE, SIZE & VOLTAGE

Disc
Dia.		 HP Spindle
RPM		 Starter Type - Size Spindle
Height		 Net
Weight
12 2 1800 S 402-202 39 630
14 3 1800 S 402-203 39 387
18 3 1200 S 402-303 39 790
14 5 1800 S 402-205 39 820
18 5 1200 M 402-305 38 1090

CONDENSED SPECIFICATIONS - TYPE 413
DISC GRINDER - BELT DRIVE
Order by TYPE, SIZE & VOLTAGE

Disc
Dia.		 HP Spindle
RPM		 Starter Type - Size Spindle
Height		 Net
Weight
24 10 875 M 413-410 39 1870
30 20 700 M 413-420 39 2420

CONDENSED SPECIFICATIONS - TYPE 502
GRINDER/DISC GRINDER - DIRECT DRIVE
Order by TYPE, SIZE & VOLTAGE

Disc
Dia.
Wheel Size
Dia. x Face x Arbor		 HP Spindle
RPM		 Starter Type - Size Spindle
Height		 Net
Weight
12 12 x 2 x 1-1/4 2 1800 S 502-202 39 625
14 14 x 2-1/2 x 1-1/4 3 1800 S 502-203 39 650
14 14 x 3 x 1-1/4 5 1800 S 502-205 39 800
18 18 x 3 x 1-1/2 5 1200 M 502-305 38 1140
All dimensions are in inches and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.


Standard
  • Shaft lock
  • Electrics:  3 phase, 60 Hertz, 230/460 volts (specify operating voltage when ordering)
  • Saf-T-Square guard on conventional wheel only (Type 502), adjustable spark breaker and tool rest.  Both guards with exhaust outlet.
  • Tool tray water pot on Type 502 through Size 205
  • Telescopic guards (disc wheels only), adjustable to wear
  • Steel wheel mounting disc accurately machined and balanced (specify hole pattern to be drilled in disc mounting plate when ordering)
 Optional at extra cost

PREVIOUS PAGEINDEXEMAILRETURN TO HOME PAGENEXT PAGE