Substantial hood with hinged doors at either side for left hand or right hand use. Made of 10 gauge steel, with spindle end and nut protector, clean out trap at bottom and rear exhaust outlet. Can be adjusted for spindle heights from 37" to 41".

• Type 000-221 for 10" x 2" wheels
• Type 000-222 for 12" x 2" wheels
• Type 000-223 for 14" x 3" wheels
• Type 000-224 for 16" x 3" wheels

Designed for 118", 132", 148" or 168" belts. Specify belt length, diameter and width of contact wheel, diameter of idler, spindle height, idler centerline height and whether for right hand or left hand side.

• Type 000-202 for pedestal mounted backstand idler
• Type 000-203 for floor mounted backstand idler

Well designed and heavily constructed belt idler for abrasive belts, available in pedestal and bench models (shown) with automatic (adjustable) spring tension and manual adjustment for belt tracking. Also, available with air tension. Available in 4" wide and 8" wide models. Specify pulley on right hand or left hand side.

Fittings and flexible exhaust ducting for connecting grinder guard outlets or buffer hoods to unit dust collector or to central exhaust system.

• Flexible duct (upper left)
• Shut-off gate (upper right)
• Nozzle (bottom right)
• Y reducer (bottom left)

Standard screw-in taper arbor for buffing wheels. Specify if for right hand or left hand side when facing front of machine. Contact the factory for complete specifications.