Cincinnati
10", 12" & 14" Wheels
Direct Drive - 1 to 5 HP
TYPE 303 Pedestal
TYPE 353 Bench
COMBINATION
GRINDER/BUFFER

 
Type 303 Combination Grinder/Buffer The Cincinnati combination grinder/buffer offers useful versatility where both grinding and buffing are done. Motors are totally enclosed, non-ventilated, rated for continuous grinding service. All are equipped with ball bearings, grease lubricated and sealed; designed for long life. Starting equipment is indicated in the chart below. For added safety, the use of an eye shield and a dust collector is suggested. A shaft holding device is provided as standard to simplify wheel changing.
 
WARNING
Buffers, Polishers and Abrasive Belt Grinders must be used with Exhaust Hoods or Abrasive Belt Guards.
Type 303 (above)
Shown is Grinder/Buffer for 10" grinding wheel and suitable buff; Size 201, 1 HP at 1800 RPM. Configuration of larger models may vary slightly.		 Type 303-203 (right)
With Type 000-202 Abrasive Belt Guard and Pedestal mounted Backstand Idler with Dust Collector System
Type 303-203 Grinder/Abrasive Belt Grinder with Dust Collector

CONDENSED SPECIFICATIONS - TYPE 303
Order by TYPE, SIZE & VOLTAGE

Wheel Size
Dia. x Face x Arbor		 HP  Spindle
RPM		 Starter
Type - Size
 Wheel
Spacing		 Spindle
Height		 Net
Weight
10 x 1-1/4 x 7/8  1 1800 T 303-201  27-17/32 39-7/8 255
12 x 2 x 1-1/4 2 1800 S 303-202 35-7/8 39 405
14 x 2-1/2 x 1-1/4 3 1800 S 303-203 35-7/8 39 480
14 x 3 x 1-1/4 5 1800 S 303-205 35-7/8 39 500
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.

CONDENSED SPECIFICATIONS - TYPE 353
Order by TYPE, SIZE & VOLTAGE

Wheel Size
Dia. x Face x Arbor		 HP  Spindle
RPM		 Starter
Type - Size
 Wheel
Spacing		 Spindle
Height		 Net
Weight
10 x 1-1/4 x 7/8  1  1800 T 353-201  27-17/32 8 200
12 x 2 x 1-1/4 2 1800 S 353-202 35-7/8 6 350
14 x 2-1/2 x 1-1/4 3 1800 S 353-203 35-7/8 6 420
14 x 3 x 1-1/4 5 1800 S 353-205 35-7/8 6 550
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S - push button safety starter; M - magnetic starter.
Note:  On Type 353-202, 353-203 and 353-205, wheel guards extend lower than mounting surface.
Standard
  • Saf-T-Square guard with rear exhaust outlet, adjustable spark breaker, tool rest
  • Tool tray and water pot
  • Shaft holder
  • Electrics: 3 phase, 60 Hertz, 230/460 volts (specify operating voltage when ordering)
 Optional at extra cost

PREVIOUS PAGEINDEXEMAILRETURN TO HOME PAGENEXT PAGE