Cincinnati
TWIN MOTOR - BELT DRIVE
TYPE 234 Single Speed
TYPE 244 Variable Speed
HEAVY DUTY
BUFFERS/POLISHERS

 
VARIABLE SPEED - TWIN MOTOR SINGLE SPEED - TWIN MOTOR
Type 244 Variable Speed Twin Motor Buffer Type 234 Single Speed Twin Motor Buffer
Type 244
Adjustable speed range 1500 to 3000 RPM		 Type 234
Choose any single speed between 1500 and 4000 RPM
These heavy duty, high production buffing, polishing and abrasive belt machines are proven performers under the heaviest production demands. Open motors, rated for continuous operation are mounted inside the heavy base.

The precision spindles are equipped with ball bearings, grease lubricated and sealed for long service. Twin motors and twin spindles allow complete flexibility in use by two operators.

 
WARNING
Buffers, Polishers and Abrasive Belt Grinders must be used with Exhaust Hoods or Abrasive Belt Guards.

DIMENSIONAL OUTLINE Types 234 and 244

CONDENSED SPECIFICATIONS - TYPE 234
SINGLE SPEED - TWIN MOTORS
Order by TYPE, SIZE & VOLTAGE

HP Spindle
Speed
RPM
Type - Size
 Starter  Net
Weight		 A B1 C D E F H J
 5  Specify
any single
speed
between
1500 and
4000 RPM		 234-305 M 1625 6 * 4 1-1/4 11 39 60
72
7-1/2
234-307
M
1770
6
*
4
1-1/4
11
39
60
72
10
234-310
M
1890
6
*
4
1-1/4
11
39
60
72
15
234-315
M
2150
6
*
4
1-1/4
11
39
60
82
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.
 

CONDENSED SPECIFICATIONS - TYPE 244
VARIABLE SPEED - TWIN MOTORS
Order by TYPE, SIZE & VOLTAGE
Specify OPERATING SPEED on Order

HP Spindle
Speed
RPM
Type - Size
 Starter  Net
Weight		 A B1 C D E F H J
 5  Infinitely
Variable
1500 to
3000 RPM		 244-205  M  2310 10 * 4 1-1/4 13 39 66
78
7-1/2
244-207
M
2425
10
*
4
1-1/4
13
39
66
78
10
244-210
M
2640
10
*
4
1-1/4
13
39
66
78
15
244-215
M
2790
10
*
6
1-1/4
13
39
66
78
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.


NOTES:
   1. To order at extra cost. Standard is inside wheel flange flush with the housing

 
Standard
  • Type 234 - shaft lock, Acme threads and bronze hex nuts, combination switch/brake
  • Electrics: 3 phase, 60 Hertz, 230/460 volts (specify operating voltage when ordering)
 Optional at extra cost

PREVIOUS PAGEINDEXEMAILRETURN TO HOME PAGENEXT PAGE