Cincinnati
TYPE 222 - Variable Speed
TYPE 212 - Single Speed
BELT DRIVE BUFFERS/POLISHERS

 
Type 222 Variable Speed Buffer
Type 222
With magnetic starter and Type 000-226 Buffing Hoods		 VARIABLE SPEED
SINGLE MOTOR
OPEN SPINDLE

2 to 7-1/2 HP
1500 to 3000 RPM

Open spindle (naked extension) buffing machines provide additional clearance for work pieces where deep reach is required.  Variable speed control allows quick selection of speed.  The precision spindle is mounted on two ball bearings which are grease lubricated and sealed.  The TEFC motor is mounted inside the base.

 Type 212 Single Speed Buffer
Type 212
Shown with optional shaft lock		 SINGLE SPEED
SINGLE MOTOR
OPEN SPINDLE

2 to 7-1/2 HP
Any single speed between 1200 and 4000 RPM

Select the speed for your operation; any speed between 1200 and 4000 RPM.  Precision spindle is mounted on two ball bearings which are grease lubricated and sealed.  The open motor is mounted inside the base.

 
WARNING
Buffers, Polishers and Abrasive Belt Grinders must be used with Exhaust Hoods or Abrasive Belt Guards.

CONDENSED SPECIFICATIONS - TYPE 222
Order by TYPE, SIZE & VOLTAGE

HP Spindle
RPM		 Starter Type - Size Net
Weight		 A B C D E F H J
2 Infinitely
Variable
1500 - 3000		 S 222-202 635 8 4 2-1/2 1-1/4 4-3/4 39 41 50
3 S 222-203 655 8 4 2-1/2 1-1/4 4-3/4 39 41 50
5 S 222-205 701 8 4 3 1-1/4 4-3/4 39 41 50
7-1/2 S/M* 222-207 770 8 4 3 1-1/4 4-3/4 39 41 50
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.
* On 230 V Machine Only
 

CONDENSED SPECIFICATIONS - TYPE 212
Order by TYPE, SIZE & VOLTAGE
Specify operating speed when ordering

HP Spindle
RPM		 Starter Type - Size Net
Weight		 A B C D E F H J
2 Single
Speed
Between
1200 - 4000		 S 212-302 635 8 4 2-1/2 1-1/4 4-3/4 39 41 50
3 S 212-303 655 8 4 2-1/2 1-1/4 4-3/4 39 41 50
5 S 212-305 701 8 4 3 1-1/4 4-3/4 39 41 50
7-1/2 S/M* 212-307 770 8 4 3 1-1/4 4-3/4 39 41 50
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.
* On 230 V Machine Only


Standard
  • Shaft holder
  • Electrics: 3 phase, 60 Hertz, 230/460 volts (specify operating voltage when ordering)
 Optional at extra cost

PREVIOUS PAGEINDEXEMAILRETURN TO HOME PAGENEXT PAGE