Cincinnati Electrical Tool Buffers

Cincinnati
1 to 7-1/2 HP - Direct Drive
TYPES 202 & 204 - Pedestal
TYPES 252 & 254 - Bench

DIRECT DRIVE
BUFFERS/POLISHERS

These heavily built machines are ideal for a wide range of work employing buffing, polishing or wire brush wheels. Type 204, with enclosed spindle extensions, has four bearings. Type 202, with open spindle extensions, has two bearings. All motors are totally enclosed, rated for continuous buffing/polishing service, with grease lubricated and sealed ball bearings. Starting equipment as tabulated below.

Type 202
Open Spindle

Type 204
Enclosed Spindle

	WARNING
Buffers, Polishers and Abrasive Belt Grinders must be used with Exhaust Hoods or Abrasive Belt Guards.

DIMENSIONAL OUTLINE Types 202 and 204

CONDENSED SPECIFICATIONS - TYPE 202
Order by TYPE, SIZE & VOLTAGE

HP	Spindle RPM	Type - Size	Starter	Net Weight	B	C	D	F	H
1	3600 1800	202-101 202-201	T	255	5-7/16	1-1/4	7/8	40	26-5/8
2	3600 1800	202-102 202-202	S	330	3-3/4	2	1-1/4	39	29-13/16
3	3600 1800	202-103 202-203	S	390	3-3/4	3	1-1/4	39	29-13/16
5	3600 1800	202-105 202-205	S	415	3-3/4	3	1-1/4	39	29-13/16

All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.

CONDENSED SPECIFICATIONS - TYPE 204
Order by TYPE, SIZE & VOLTAGE

HP	Spindle RPM	Type - Size	Starter	Net Weight	B	C	D	F	H
1	3600 1800	204-101 204-201	T	278	1-1/16	1-1/4	7/8	40	37-3/8
2	3600 1800	204-102 204-202	S	410	1-5/16	2	1-1/4	39	46-13/16
3	3600 1800	204-103 204-203	S	445	1-5/16	3	1-1/4	39	46-13/16
5	3600 1800	204-105 204-205	S	475	1-5/16	3	1-1/4	39	46-13/16

All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.

CONDENSED SPECIFICATIONS - TYPE 252
Order by TYPE, SIZE & VOLTAGE

HP	Spindle RPM	Type - Size	Starter	Net Weight	B	C	D	F	H
1	3600 1800	252-101 252-201	T	255	5-7/16	1-1/4	7/8	8	26-5/8
2	3600 1800	252-102 252-202	S	330	3-3/4	2	1-1/4	5	29-13/16
3	3600 1800	252-103 252-203	S	390	3-3/4	3	1-1/4	5	29-13/16
5	3600 1800	252-105 252-205	S	415	3-3/4	3	1-1/4	5	29-13/16

All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.

CONDENSED SPECIFICATIONS - TYPE 254
Order by TYPE, SIZE & VOLTAGE

HP	Spindle RPM	Type - Size	Starter	Net Weight	B	C	D	F	H
1	3600 1800	254-101 254-201	T	255	5-7/16	1-1/4	7/8	8	26-5/8
2	3600 1800	254-102 254-202	S	330	3-3/4	2	1-1/4	5	29-13/16
3	3600 1800	254-103 254-203	S	390	3-3/4	3	1-1/4	5	29-13/16
5	3600 1800	254-105 254-205	S	415	3-3/4	3	1-1/4	5	29-13/16

All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.

Standard

Shaft holder

Electrics: 3 phase, 60 Hertz, 230/460 volts (specify operating voltage when ordering)

Optional at extra cost

Adjustable buffing hoods

Buffs and wire wheels

Other electrics: D, E, F, G

Other staring equipment, including JIC standards

Shaft lock (except 1 HP)

Special spindle speed of 1200 RPM

Dust collectors