Cincinnati
1/4" to 2-1/2" Drills Straight
or Taper Shanks 2, 3 or 4 Flutes
TYPE 172 - Dry
TYPE 176 - Wet
WET AND DRY DRILL GRINDERS

 
Type 172 Dry Grinder Type 176 Wet Drill Grinder
Type 172 Dry Grinder Type 176 Wet Grinder
These heavy duty drill grinders offer complete facilities for conventional drill grinding and will handle the drills and point requirements found in most plants.  They will accommodate flat or chucking drills and with oversize shanks.  Point angle can be varied from 40o to 70o - 11o above and 19o below the standard 59o point.  A screw feed provides for equal angles and lip lengths.  The V-guide supports drills up to 20" long. The drill grinders are equipped with totally enclosed, non-ventilated motors rated for continuous grinder service.  Ball bearings are grease lubricated and sealed; designed for long life.  Toggle switches are provided as standard.  A shaft holding device is furnished to simplify wheel changing.  The straight wheel side of these grinders is equipped with the unique Cincinnati Saf-T-Square guard.

CONDENSED SPECIFICATIONS
Order by TYPE, SIZE & VOLTAGE

  HP Spindle
RPM		 Starter Type - Size Wheel
Spacing		 Spindle
Height		 Net
Weight
Dry Grinder 1 1800 T 172-201 18 41 360
Wet Grinder 1 1800 M 176-201 18 41 495
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.
Wheels (not included): Straight wheels are 10" diameter x 1-1/4" face x 7/8" arbor
Cup wheels are 10" diameter x 1-1/2" high x 7/8" arbor with 6" x 1/2" recess one side only


Standard
  • Shaft holder
  • Type 172 - Toggle switch
  • Type 176 - Magnetic starter with 115 volt control circuit transformer
  • Electrics: 3 phase, 60 Hertz, 230/460 volts (specify operating voltage when ordering)
  • Saf-T-Square guard, adjustable spark breaker, tool rest on straight wheel side
  • Both guards with exhaust outlet
  • Type 172 - tool tray and water pot
  • Type 176 - self priming pump, splash pan, settling tank reservoir with drain, piping, coolant control valve and adjustable nozzle
  • Diamond wheel dresser on cup wheel side
 Optional at extra cost

 

PREVIOUS PAGEINDEXEMAILRETURN TO HOME PAGENEXT PAGE