Cincinnati Electrical Tool Wet/Dry Grinders

Cincinnati
12" to 18" Wheels - 2 to 5 HP
TYPE 105 - Double End Wet
TYPE 106 - Combination Wet/Dry

DOUBLE END
WET & WET/DRY
GRINDERS


Type 105 Double End Wet Grinder (Wheels not included)	Type 106 Combination Wet/Dry Grinder (Special starter shown)

Choose Type 105 for wet grinding or Type 106 where both wet and dry grinding are done. Type 105 has motor driven pump and tank mounted on the rear of the base. Type 106 has pump/reservoir below wet wheel, with belt drive from grinder spindle.

The dry side of the Type 106 has the Cincinnati Saf-T-Square guard. Wheels can be mounted without dismantling guard.

Motors are totally enclosed, non-ventilated types, rated for continuous grinder service. All are equipped with ball bearing, grease lubricated and sealed, designed for long life.

CONDENSED SPECIFICATIONS - TYPE 105
Order by TYPE, SIZE & VOLTAGE

Wheel Size Dia. x Face x Arbor	HP	Spindle RPM	Starter	Type - Size	Wheel Spacing	Spindle Height	Net Weight
12 x 2 x 1-1/4	2	1800	M	105-202	25	39	471
14 x 2-1/2 x 1-1/4	3	1800	M	105-203	25	39	560
14 x 3 x 1-1/4	5	1800	M	105-205	25	39	602
18 x 3 x 1-1/4	5	1800	M	105-305	30	38	1190

All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.

CONDENSED SPECIFICATIONS - TYPE 106
Order by TYPE, SIZE & VOLTAGE

Wheel Size Dia. x Face x Arbor	HP	Spindle RPM	Starter	Type - Size	Wheel Spacing	Spindle Height	Net Weight
12 x 2 x 1-1/4	2	1800	M	106-292	24	38	570
14 x 2-1/2 x 1-1/4	3	1800	M	106-293	24	38	590
14 x 3 x 1-1/4	5	1800	M	106-295	27	39	630
18 x 3 x 1-1/4	5	1200	M	106-395	32	38	805

All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.

Standard

On dry wheels, Saf-T-Square guards with rear exhaust outlet, adjustable spark breaker and tool rest
Shaft holder on all except Sizes 305, 292 & 293
Magnetic starter with 115 volt control circuit transformer
Electrics: 3 phase, 60 hertz, 230/460 volts (specify operating voltage when ordering)

Optional at extra cost

Other electrics: D, E, F, G
Other staring equipment, including JIC standards
Shaft lock (except Size 305, 292 & 293)
For dry wheels: eye shields, dust collectors