Cincinnati
6" to 20" Wheels - 1/3 to 7-1/2 HP
Direct Drive
TYPE 102
DOUBLE END
PEDESTAL GRINDERS

 
Size 202 Pedestal Grinder
2 HP at 1800  RPM;
wheels optional;
configuration of larger or smaller sizes may vary slightly
These general purpose grinders are constructed and proven for long, trouble-free service.  The motors are totally enclosed, non-ventilated, rated for continuous grinder service.  All are equipped with ball bearings, grease lubricated and sealed; designed for long life.  Starting equipment is indicated in the chart below.  For additional utility and safety, the use of eye shields and dust collectors is suggested.  These grinders are equipped with Cincinnati Saf-T-Square guards.
Size 305 with shaft lock and optional illuminated eye shields

CONDENSED SPECIFICATIONS - TYPE 102
Order by TYPE, SIZE & VOLTAGE

Wheel Size
Dia. x Face x Arbor
HP Spindle
RPM
Starter Type - Size Wheel
Spacing
Spindle
Height
Net
Weight
6 x 3/4 x 1/2 1/3 3600 T 102-113 14 37 157
7 x 1 x 5/8 1/2 3600 T 102-112 15 38 175
8 x 1 x 3/4 3/4 3600 T 102-134 17 39 193
10 x 1 x 7/8 1 1800 T 102-211 17 40 255
10 x 1-1/4 x 7/8 1 1800 T 102-201 18 39 230
12 x 2 x 1-1/4 2 1800 S 102-202 25 39 410
14 x 2-1/2 x 1-1/4 3 1800 S 102-203 25 39 490
14 x 3 x 1-1/4 5 1800 S 102-205 25 39 505
18 x 3 x 1-1/2 5 1200 S 102-305 33 38 810
All dimensions are in inches, weight in pounds and are approximate.
Starting equipment as indicated above: T - toggle switch; S- push button safety starter; M - magnetic starter.


Standard
  • Wheels on Sizes 113, 112, 134 and 211 (one each, course & medium grit)
  • Saf-T-Square guards (except Sizes 113, 112, 134 & 211), with adjustable spark breaker, tool rest, rear exhaust outlet
  • Tool tray and water pot through Size 205
  • Shaft holder through Size 205; Shaft lock on Sizes 305 & 307
  • Electrics: 3 phase, 60 Hertz, 230/460 volts.  All except Sizes 112, 134 & 211 which are available with B electrics and Size 113 which is also available with A, J and K electrics - (specify operating voltage when ordering)
Optional at extra cost

 

PREVIOUS PAGEINDEXEMAILRETURN TO HOME PAGENEXT PAGE